| Customization: | Available |
|---|---|
| Electricity Type: | DC |
| Rated Current: | 400A |
|
Still deciding? Get samples of US$ 22/Piece
Order Sample
|
| Shipping Cost: | Contact the supplier about freight and estimated delivery time. |
|---|
| Payment Methods: |
|
|---|---|
| Support payments in USD |
| Secure payments: | Every payment you make on Made-in-China.com is protected by the platform. |
|---|
| Refund policy: | Claim a refund if your order doesn't ship, is missing, or arrives with product issues. |
|---|
Suppliers with verified business licenses
Audited Supplier Audited by an independent third-party inspection agency
SW200 DC Contactor is designed for use in telecommunication and power distribution applications where an uninterrupted load is switched. These contactors are primarily for use with Direct Current loads but can also be used with Alternating Currents.
• Uninterrupted current - no or infrequent load switching requirements (maintains a lower contact resistance).
The series features double breaking main contacts with silver alloy tips which are weld resistant, hard wearing and have excellent conductivity. Silver plating on the main contacts is standard for the series, however optionally it can be excluded from the specification. The series is a compact contactor which can be busbar mounted vertically or horizontally, if mounted vertically the coil should be at the bottom.
| Model | SW200 |
| Rated Current | 200A |
| Contact Form | 1NO, SPST |
| Contact Voltage | 6-80V DC |
| Coil Voltage | 12VDC, 24VDC, or other DC voltgae less than 220VDC |
| Coil Power | 11-14W |
| Dielectric Voltage Strength | 50Hz 1000V AC 1min |
| Volt Drop of Main Contact | <80mV |
| Typical Pull-In Time | <30ms |
| Typical Drop-Out Time (N/O Contacts to Open) |
<30ms |
| Pull-In Voltage (Coil at 20ºC) | <66%Us |
| Drop-Out Voltage (Coil at 20ºC) | 5% - 30% |
| Mechanical life | 100 thousand times |
| Electric life | 20 thousand times |
| Circuit Diagram |  |
Diagram & Dimension:
){kind=link}